 |
The Bio-chem range for prevention of weld spatters includes:
- fun @ welding
- Safe weld
- Safe weld L
|
 |
- Adheres to the surface / equipment.
- Hard work to remove them by either wire-brush or grind-wheel.
- Non-removed spatters are often, the cause of corrosion.
|
 |
- Thin film acts as barrier between work piece and hot material
- Surplus Bio-Chem Welding Protection Spray vaporizes away on the hot surface of the work piece
|
|
Bio-chem Anti spatter products over Aerosol cans
|
| Aerrosol Cans |
Bio-chem Anti spatter |
| Contains oils and solvents |
Made out of natural ingredients |
| Oils emit odour and toxic gases while welding |
Odourless & non toxic |
| May explode beyond 50°C |
Safe, since it comes in PET bottles that withstand high temperatures |
| Contents cannot be seen |
Fully transparent |
| contains only 20-30% active ingredients, balance is propellants |
100% active ingredients |
| Contains Silicon that causes problems during painting or galvanizing |
No Silicon |
| Cannot clean surface post welding |
Leaves cleans surface post welding |
| Non-uniform discharge |
Uniform discharge |
| No corrosion protection properties |
Provides temporary corrosion protection |
| Contents are Inflammable |
Contents are not Inflammable |
| Cannot be used in air spray systems |
Can be used in air spray systems |
| Refilling not possible |
Refilling possible |
| Cannot be reused |
Cans can be reused |
|
 |
...for hassle free welding
- Prevents adhesion of weld spatter to surface
- Protects work piece, welding nozzle and welding equipment
- Works well on both dry and wet surfaces
- Suitable for welding steel and other metals
- Offers temporary corrosion protection
- Free of solvents and silicons and non inflammable
- Odourless
- Acts as a cleaning agent also
- 0.4 mm nozzle ensures a very fine spray
- Economical - as a thin protective film is sufficient
- Ensures that surface is ready for painting without further treatment
|
 |
 |
 |
 |
 |
...for multi-layer welding and pre-heated metal surfaces
- Protects surface from spatter
- Can be used in all types of materials
- Offers corrosion protection
- Non inflammable
- Odourless
- free of solvents
- Surface can be painted or powder coated after use
|
 |
...for spatter free welding
- Non-toxic liquid
- No toxic fumes during welding
- Odourless
- Contains no silicon, lends surface well for painting after welding
- Contains corrosion inhibitors, provides temporary corrosion protection
- Free of solvents, user friendly
- Not inflammable and not explosive - Safe for transport & storage
- Can be used for all metals
|
 |
| The alternative to passivation with pickling paste |
Patented cleaning system for stainless for the removal of heat coloration from welding seams. Restores the original gloss of the welded points. The surfoxT cleaning agent works by means of electrolysis. This means fewer risks for the user than in working with corrosive fluid, hydrofluoric acid or nitric acid
- Fast cleaning and passivation
- Automatic or manual pump system for the precise dosing of the electrolytic fluid SurfoxT
- No neutralization required - the processed points are wiped with a damp cloth or rinsed with water
- For the permanent marking (black etching) of stainless steel a marking kit is available as an option
Applications : Stainless steel manufacturing, foodstuffs and refrigeration industry.
|
|
